本設備是通過使用發電廠從高壓活塞泵產生高壓水來沖擊地面的機器。它可去除污垢并將其清洗干凈，以清潔物體表面。這種清洗方法對設備的材料，特性，形狀和污垢類型沒有特殊要求，只需要直接注射，因此應用非常廣泛。由于使用高壓水柱清潔污垢，高壓清潔也被認為是科學，經濟和環保的清潔方法之一。

This equipment is a machine that uses a power plant to generate high-pressure water from a high-pressure piston pump to impact the ground. It can remove dirt and clean it thoroughly to clean the surface of objects. This cleaning method has no special requirements for the material, characteristics, shape, and type of dirt of the equipment, and only requires direct injection, so it is widely used. Due to the use of high-pressure water columns to clean dirt, high-pressure cleaning is also considered one of the scientific, economical, and environmentally friendly cleaning methods.

它的清洗系統負責零部件的清洗工作，是整個清洗機的核心。基于不同原理的通用、柔性、超聲波等清洗機的差別主要體現清洗系統上。清洗系統工藝繁多，例如噴射類清洗系統根據不同零件以及同一零件各個部位的不同清洗要求，有高、低壓噴射清洗工藝以及定點、定位清洗中的插洗、堵洗等工藝。為提高零件及部件總成清潔度，在清洗裝置中必須設置過濾器，對清洗液進行嚴格的過濾，因此過濾系統在清洗機中占有重要地位。根據過濾工藝、過濾精度不同，過濾器可分為轉鼓過濾器、紙帶過濾器、袋式過濾器以及技術好的自清潔式過濾器。

Its cleaning system is responsible for the cleaning of components and is the core of the entire cleaning machine. The differences between universal, flexible, ultrasonic and other cleaning machines based on different principles are mainly reflected in the cleaning system. There are various cleaning system processes, such as spray cleaning systems, which have high and low pressure spray cleaning processes according to different parts and different cleaning requirements of the same part, as well as insertion and blocking cleaning processes in fixed point and positioning cleaning. To improve the cleanliness of parts and component assemblies, filters must be installed in the cleaning device to strictly filter the cleaning solution. Therefore, the filtering system plays an important role in the cleaning machine. According to different filtration processes and filtration accuracy, filters can be divided into drum filters, paper tape filters, bag filters, and technically advanced self-cleaning filters.

超高壓清洗機的技術優勢：

Technical advantages of ultra-high pressure cleaning machines:

(1)清洗質量好

(1) Good cleaning quality

清洗管道及熱交流器內孔時，能將管內的結垢物和梗塞物全部剔除潔凈，可見到金屬本體。具有較大的能量且以超音速運動的高壓水射流，完整可以毀壞堅硬結垢物和梗塞物，但對金屬沒有任何毀壞作用。同時又由于高壓水的壓力小于金屬或鋼筋混凝土的抗壓強度等級，高壓水射流清洗不會損傷被清洗基體。

When cleaning the pipes and the inner holes of the heat exchanger, all scale and infarcts inside the pipes can be removed and cleaned, and the metal body can be seen. A high-pressure water jet with high energy and supersonic motion can completely destroy hard scaling and blockages, but has no destructive effect on metals. At the same time, due to the pressure of high-pressure water being lower than the compressive strength level of metal or reinforced concrete, high-pressure water jet cleaning will not damage the cleaned substrate.

(2)清洗速度快

(2) Fast cleaning speed

由于水射流的沖刷、楔劈、剪切、磨削等復合破碎作用，可疾速將結垢物打碎零落，比傳統的化學辦法、噴砂拋丸辦法、簡單機械及手工辦法清洗速度快幾倍到十幾倍。同時，采用高壓水射流清洗后的部件，無需停止二次干凈處置;而化學清洗后，則需用清水將外表的化學藥劑清洗掉。

Due to the combined crushing effects of water jet erosion, wedge splitting, shearing, and grinding, scaling can be quickly broken and scattered, which is several to ten times faster than traditional chemical methods, sandblasting and shot blasting methods, simple mechanical and manual methods for cleaning. At the same time, after using high-pressure water jet cleaning, there is no need to stop secondary cleaning and disposal of the components; After chemical cleaning, the surface of the chemical agent needs to be cleaned with clean water.

(3)無環境污染

(3) No environmental pollution

由于是以清水為介質，因此水射流清洗不像噴砂拋丸及簡單的機械清洗那樣產生大量粉塵，污染大氣環境，損傷人體安康；也不像有些化學清洗那樣，產生大量廢液污染河道、土質和水質。以清水為介質水射流，無臭、無味、無毒，噴出的射流霧化后，還可降低作業區的空氣粉塵濃度，降低到國度規則的平安規范以下，因而不會形成任何污染。此外，超高壓清洗機的清洗液的回收在技術上也相對容易完成。

Due to the use of clean water as the medium, water jet cleaning does not generate a large amount of dust like sandblasting and simple mechanical cleaning, polluting the atmospheric environment and damaging human health; Unlike some chemical cleaning methods, which generate a large amount of waste liquid to pollute rivers, soil, and water quality. Using clear water as the medium for water jet, it is odorless, odorless, and non-toxic. After atomization, the sprayed jet can also reduce the air dust concentration in the work area to below the national safety regulations, thus avoiding any pollution. In addition, the recovery of cleaning fluid from ultra-high pressure cleaning machines is relatively easy to complete technically.

有了超聲波清洗機上面的小總結，希望對廣大客戶有所幫助，如果有什么不理解的或者尋求幫助的請點擊我們的網站：http://www.sinokohl.com或者來電咨詢，我們會盡全力為您解決

With the summary on thehttp://m.mpre.cn ultrasonic cleaning machine, I hope it can be helpful to our customers. If you have any questions or need help, please click on our website: http://m.mpre.cn Or call for consultation, and we will do our best to solve it for you